Hobbyist Kits & Supplies

$64.95
Welcome to the exciting hobby of robot building! The DODGER (Dueliminove Object Detection Ground Exploration Robot) is a relatively simple to build project,...
In stock
+
Add to wish list

$0.50
In stock
+
Add to wish list

$1.95
In stock
+
Add to wish list

$1.25
In stock
+
Add to wish list

$1.25
In stock
+
Add to wish list

$1.25
In stock
+
Add to wish list

$50.00
Robot Date Night is our special after hours BYOB event for adults looking to put a little extra spark in their relationship. You can choose from...
In stock
+

Minimum quantity for "Robot Date Night for Two" is 1.

Add to wish list

$4.95
This sensor pair can be used for obstacle avoidance; the obstacle avoidance effective distance is about 6-7CM. Also great for line tracking applications.
In stock
+
Add to wish list

$24.95
2 x DC motors, 3-CH servo motor drive, 3-CH universal car drivers port (can connect drive buzzer, relay, etc.); Integrated infrared remote control, multi...
In stock
+
Add to wish list

$9.95
- Cable length: About 10cm - Can be used to jumper between any female headers or between two points on a breadboard - 65 pieces per pack - Assorted colors
In stock
+
Add to wish list

$6.95
Detecting range: 0.591" (15mm); Detecting method: Reflective; Collector Emitter Voltage: 70V; Collector Current: 100mA; Forward Current: 60mA; Output type:...
In stock
+
Add to wish list

$14.95
- On-board two HG7881 motor control chips - The module can simultaneously drive two DC motors or a 4-wire 2-phase stepping motor - Input voltage :2.5~12V...
In stock
+
Add to wish list

$19.95
How To Information Click Here   The nRF24L01 is a single chip 2.4GHz transceiver with an embedded baseband protocol engine (Enhanced...
In stock
+
Add to wish list

$5.95
Dimensions: 1.57 in x 1.06 in x 0.71 in (4.0 cm x 2.7 cm x 1.8 cm) Weight: 0.49 oz (14 g)   -5V-12V TTL control signal, can control DC/AC signal -...
In stock
+
Add to wish list

$3.00
Made of brass, these are great for mounting circuit boards
In stock
+
Add to wish list

$3.00
In stock
+
Add to wish list

$1.00
10mm diameter.
Out-of-stock Add to wish list

$12.95
Red LED 5mm, standard leads. 50 pcs.
Out-of-stock Add to wish list

$12.95
Green 5 mm LED with standard leads. 50 pcs.
In stock
+
Add to wish list

$1.25
White panel mount LED,clear lens. Luminous intensity MSCP 10, forward current 10mA, forward voltage 2.1V, back/red leads 15cm.
In stock
+
Add to wish list

$1.25
Red panel mount LED. Clear lens. Luminous intensity MSCP 10, forward current 10mA, forward voltage 2.1V, back/red leads 15cm.
In stock
+
Add to wish list

$1.25
Green panel mount LED,clear lens. Luminous intensity MSCP 10, forward current 10mA, forward voltage 2.1V, back/red leads 15cm.
In stock
+
Add to wish list

$4.25
5mm, clear case. 10 pcs.
In stock
+
Add to wish list


$6.00
In stock
+
Add to wish list

$3.50
In stock
+
Add to wish list

$2.50
In stock
+
Add to wish list

$2.00
In stock
+
Add to wish list

$2.50
In stock
+
Add to wish list

$4.95
material: zinc-plated steel screws: M2x12mm: 20pcs M2x19mm: 20pcs M3x12mm: 20pcs M3x19mm: 20pcs M4x12mm: 20pcs M4x25mm: 10pcs full nuts: M2: 40pcs M3: 40pcs...
In stock
+
Add to wish list

$2.50
Use these spacers to raise your PCB up from your project surface, protecting the underside. 10 pcs.
In stock
+
Add to wish list

$0.50
Use this clamp to hold larger motors in place.
In stock
+
Add to wish list

$0.50
Use this clamp to hold a variety of small motors in place.
In stock
+
Add to wish list

$2.00
In stock
+
Add to wish list

$2.00
In stock
+
Add to wish list

$2.00
Although the picture shows beige, this knob is actually black with an aluminum plate as it's center.
In stock
+
Add to wish list

$0.50
 9 Volt battery snap with leads.
In stock
+
Add to wish list

$2.00
Coin cell battery holder for 20mm batteries such as CR2016,CR2032 or CR2025. Solder lugs.
In stock
+
Add to wish list

$1.00
In stock
+
Add to wish list

$1.50
Single AA battery holder with 4" leads.
In stock
+
Add to wish list

$1.00
Single AA battery holder with solder lugs at either end.
In stock
+
Add to wish list

$5.95
Package of 12 super bright Red/Green jumbo T1 3/4 5mm LEDs. These have a diffused frosted lens and 3 long leads.
In stock
+
Add to wish list

$2.50
4 AA battery holder with leads.
In stock
+
Add to wish list

$4.00
21 Segments.
In stock
+
Add to wish list

$1.50
(2) AAA Battery holder with leads.
In stock
+
Add to wish list

$1.25
5mm, clear case. Color changes rapidly from red to green automatically.
In stock
+
Add to wish list

$2.50
Fuse holder clips for cylindrical 1/4" fuses. Lugs on the bottom are designed to be used with standard through hole circuit board assembly where they can be...
In stock
+
Add to wish list

$1.25
Fuse holder for 1/4" cylindrical fuses. Solder lugs for wires, mount holes on base.
In stock
+
Add to wish list